‧AC‧S119AP
120x120x38.5mm/4.7x1.5inch
125 CFM
Sinwan Plastic Impeller Tubeaxial Fan
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S119AP-11-1** 115 100~120 50/60 16/14 (~22) 2600/3050 106/125 3/3.5 0.30/0.32 7.62/8.13 45 2/1 £
S119AP-11-2** 115 100~120 50/60 12/10 2200/2000 88/80 2.5/2.3 0.22 /0.19 5.59/4.83 37 4/3 £
S119AP-11-3** 115 100~120 50/60 9/7 1900/1400 78/57 2.2/1.6 0.19/0.13 4.83/3.3 27 6/5 £
S119AP-11-3 (33)** 115 100~120 50/60 9/7
(~6) 		1300/900 59/41 1.7/1.2 0.13/0.1 3.3/2.54 18 £
S119AP-22-1** 230 200~240 50/60 16/14 (~22) 2600/3050 106/125 3/3.5 0.30/0.32 7.62/8.13 45 2/1 £
S119AP-22-2** 230 200~240 50/60 12/10 2200/1900 88/78 2.5/2.2 0.22 /0.18 5.59/4.57 37 4/3 £
S119AP-22-3** 230 200~240 50/60 9/7 2000/1500 80/60 2.3/1.7 0.20/0.15 5.08/3.81 27 6/5 £
S119AP-22-3 (33)** 230 200~240 50/60 9/7
(~6) 		1200/800 43/41 1.2/1.2 0.11/0.1 2.79/2.54 18 £
S119AP-11/22-1**
dual voltage 		115
230 		100~120
200~240 		50/60 16/14 (~22) 2650/3050 106/125 3/3.5 0.30/0.32 7.62/8.13 45 2/1 £
S119AP-4-1** 24 24~28 50/60 16/14 (~22) 2500/2550 102/104 2.9/2.9 0.28/0.28 7.11/7.11 45 2/1 £
S119AP-4-2** 24 24~28 50/60 12/10 2250/1900 89/78 2.5/2.2 0.22/0.18 5.59/4.57 37 4/3 £
S119AP-38-1** 380 380~420 50/60 16/14 (~22) 2500/2600 103/108 2.9/3.1 0.28/0.29 7.11/7.37 45 2/1 £
S119AP-44-1** 440 440~480 50/60 16/14 (~22) 2600/3000 106/123 3/3.5 0.3/0.32 7.62/8.13 45 2/1 £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole induction, inner rotor, 1-phase
      Burnout Protection: Impedance protected
      IP Protection: -
      Frame: Aluminum die cast, black(S119AP)
      Impeller: 7 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings. or sleeve bearing
      Rotation: CCW seen on rotor
      Connection: Wire leads, terminal flat pin
      Weight: 600g (1.3 Lbs)
      Dielectric Strength: Over 1 min.at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output:
      Operating Temp: Non-condensing ball bearing (-20C~+70C), sleeve (-10~+40C)
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: Ball bearing 80K hours at 45C, 40K hours at 60C

     

    Metal Fan Guard
    G109-15A, G109-15B, G109-17


    Plastic Fan Guard
    G119P2, G119P4, G120P, G120P2, G120P25F, G120P4


    Plastic Fan Filter
    GRM120-30, GRM120-45


    Metal Fan Screen
    MF120S-30N