‧DC‧SD3820PT

38x38x20mm / 1.5x0.78inch

14~6.5 CFM

Plastic Impeller

	Rated Volt	Voltage Range	Input Power	Rated Current	Ref. Speed	Max.Airflow		Max.Static Pressure		Noise Level	PQ Curves	UL
Model No	VDC	VDC	Watt	Amp	RPM	CFM	m3/min	Inch/H2O	mm	db(A)
SD3820PT-12SHH**	12	7~13.2	4.2	0.35	13000	14	0.4	0.75	19.05	52	1	R
SD3820PT-12SH**	12	7~13.2	3.12	0.26	10000	10.6	0.3	0.58	14.73	43	2	R
SD3820PT-12HHH**	12	7~13.2	2.16	0.18	9300	9	0.3	0.42	10.67	42	3	R
SD3820PT-12HH**	12	7~13.2	1.92	0.16	8900	8.6	0.2	0.39	9.91	42	4	R
SD3820PT-12H**	12	7~13.2	1.56	0.13	8000	7.4	0.2	0.34	8.64	40	5	R
SD3820PT-12M**	12	7~13.2	1.2	0.1	6700	6.5	0.2	0.22	5.59	36	6	R
SD3820PT-24SHH**	24	14~26.4	4.32	0.18	13000	14	0.4	0.75	19.05	52	1	£
SD3820PT-24SH**	24	14~26.4	3.12	0.13	10000	10.6	0.3	0.58	14.73	43	2	£
SD3820PT-24HHH**	24	14~26.4	2.16	0.09	9300	9	0.3	0.42	10.67	42	3	£
SD3820PT-24HH**	24	14~26.4	1.92	0.08	8900	8.6	0.2	0.39	9.91	42	4	£
SD3820PT-24H**	24	14~26.4	1.68	0.07	8000	7.4	0.2	0.34	8.64	40	5	£
SD3820PT-24M**	24	14~26.4	1.2	0.05	6700	6.5	0.2	0.22	5.59	36	6	£

** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing Sinwan reserves the right to change data and improve electrical & mechanical design without notice, data tolerance +-10%


	Motor Type:	DC Motor

	Burnout Protection:	Electronically protected, Polarity protected

	IP Protection:	IP55, IP67 (Optional)

	Frame:	Glass fiber reinforced thermoplastic, rated UL94V-0

	Impeller:	5 blades, glass fiber reinforced plastic, rated UL94V-0

	Bearing:	Two ball bearings

	Rotation:	CCW seen on rotor

	Connection:	Wire lead or Terminal flat pin connecting

	Weight:	44g

	Dielectric Strength:	500 VAC/min. Max leakage 0.5mA

	Speed Control:	Optional: PWM, S/C NTC thermister

	Signal Output:	Optional: RD Rotation Detactor, FG Frequency Generator

	Operating Temp:	-20C~+65C

	Storage Temp:	-20C~+75C (at 65%RH)

	Life Expectancy:	L10 - B:70K hours at 40C / Y:50K hours at 40C