‧DC‧MD225AN
225x225x80mm / 8.86x3.15inch
695~270 CFM
Metal Impeller DC Fan
  额定
电压		 电压范围 输入功率 额定电流 参考转速 最大风量 最大风压 噪音 PQ
Curves 		UL
Model No VDC VDC Watt Amp RPM CFM m3/min Inch/H2O mm db(A)    
MD225AN-12HHH** 12 9~13.6 92.4 7.7 3300 695 19.7 1.1 27.94 67 1 £
MD225AN-12HH** 12 9~13.6 69.6 5.8 2800 590 16.7 0.76 19.3 63 2 R
MD225AN-12H** 12 9~13.6 46.8 3.9 2200 460 13 0.71 18.03 59 3 £
MD225AN-12M** 12 9~13.6 22.8 1.9 1800 380 10.8 0.64 16.26 53 4 R
MD225AN-12L** 12 9~14 14.4 1.2 1300 270 7.6 0.58 14.73 41 5 £
MD225AN-24HHH** 24 16~27.6 92.4 3.85 3300 695 19.7 1.1 27.94 67 1 R
MD225AN-24HH** 24 16~27.6 69.6 2.90 2800 590 16.7 0.77 19.56 63 2 £
MD225AN-24H** 24 16~27.6 46.8 1.95 2200 460 13 0.71 18.03 59 3 R
MD225AN-24M** 24 16~28 22.8 0.95 1800 380 10.8 0.64 16.26 53 4 £
MD225AN-24L** 24 16~28 14.4 0.60 1300 270 7.6 0.58 14.73 41 5 R
MD225AN-48HHH** 48 30~53 93.6 1.95 3300 695 19.7 1.1 27.94 67 1 £
MD225AN-48HH** 48 24~56 69.6 1.45 2900 595 16.8 0.79 20.07 63 2 R
MD225AN-48H** 48 24~56 45.6 0.95 2200 460 13 0.71 18.03 59 3 £
MD225AN-48M** 48 30~56 24 0.50 1800 380 10.8 064 1625.6 53 4 R
MD225AN-48L** 48 30~58 14.4 0.30 1300 270 7.6 0.58 14.73 41 5 £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
    -Optional Function Leads:
    *Alarm, motor stop, cutoff sensor signals (R/D, run-Low, stop- High for alarm function, color yellow lead)
    *Tach speed sensor output, open collector, 2 square waves per revoluation,
    or TTL 4.4~5 VDC optional (F/G, white lead)
    *Speed control:
    1.S/C, NTC thermister thermal control 1800~3400RPM/4.7~10K ohm vs 45~20C(S/C,orange lead)
    2.PWM, Pulse Width Modulation, microprocessor programmable CPU speed control,10~100%,
    full stop & 10 speed stages; 800~3800RPM (PWM, purple lead)
    3.S/V, Control voltage speed setting, Anolog 0~10V vs speed RPM speed control via separate DC low voltage interface (S/V, gray lead)
    * Please visit http://www.sinwan.com.tw/engineering.asp to get engineering information
  • 信湾保留修改资料与改良电子&机械设计的权利，无须告知。资料公差 +-10%
    		•
     
      马达类別： Microprocessor brushless DC,auto cut & restart,locking & polarity protected
      马达防护： Electrically protected
      IP 防护： IP55,56 optional request
      外框： Aluminum die-cast, naturl aluminum color treatment
      叶轮： 7 blased, all metal welded-joint fan blades, high impact, high performance
      轴承： Double sealed, permanently lubricated high precision ball bearings
      旋转方向： CCW looking at rotor, air inlet side of housing
      接头： Wire leads, Push-in Terminal type or Terminal block connecting
      重量： -
      绝缘强度： 500 VAC/min. Max leakage 0.5mA
      转速控制： PWM, S/C NTC thermister, S/V (0~10V) speed control on request
      讯号输出： Motor cut-off alarm R/D, Tach F/G
      使用温度： -20C~+65C
      保存温度： -20C~+75C (at 65%RH)
      平均预期壽命： L10 75K hours at 35C, 40K hours at 65C

     

    Metal Fan Guard
    G225-13U