‧DC‧ MED178AN Dia.77.4x56mm/3x2.2inch 30~70Watt max.

Rated Voltage Voltage Range Rated Loading Input Ref. Loading Speed No Loading Free Running Starting No Load UL Input Current Speed Voltage Input Current   Model No VDC VDC Watt RPM Watt Amp RPM VDC Watt Amp   MED178AN12-SHB** 12 8~13.8 65~64.8 4500~3500 8 0.67 5350 7 2.1 0.18 £ MED178AN12-HHB** 12 8~13.8 55~50.4 4000~3000 8 0.67 5200 7 2.1 0.18 £ MED178AN12-HB** 12 8~13.8 35~23 3500~2800 8 0.67 5000 7 2.1 0.18 £ MED178AN12-MB** 12 8~13.8 25~13.2 2800~2200 8.5 0.71 4800 8 2.1 0.18 £ MED178AN12-LB** 12 8~14 15~5.5 2300~1400 9 0.75 4500 8 2.1 0.18 £ MED178AN24-SHB** 24 15~27.6 65~63.6 4500~3500 9 0.35 5600 9.5 2.1 0.088 £ MED178AN24-HHB** 24 12~27.6 55~50.4 4000~3200 8 0.35 5500 9.8 2.1 0.088 £ MED178AN24-HB** 24 15~27.6 35~24 3500~2800 8 0.33 5300 9.8 2.1 0.088 £ MED178AN24-MB** 24 15~27.6 25~13 2800~2200 9 0.38 5100 10 2.1 0.088 £ MED178AN24-LB** 24 15~27.6 15~5 2300~1400 9 0.38 4800 10 2.1 0.088 £ MED178AN48-SHB** 48 24~55 65~62.4 4500~3400 8 0.18 5600 15 2.1 0.044 £ MED178AN48-HHB** 48 24~55 55~49.4 4000~3200 8 0.17 5500 15 2.1 0.044 £ MED178AN48-HB** 48 22~56 35~23.5 3300~2700 8 0.17 5400 15 2.1 0.044 £ MED178AN48-MB** 48 22~56 25~14.5 2800~2000 9 0.19 5100 16 2.1 0.044 £ MED178AN48-LB** 48 24~56 15~5.8 2200~1400 9 0.19 4500 16 2.1 0.044 £ **= DC / DR / UC / UR / DUC / DUR / NC / NR, for full model No. click “Nomenclature”. First *=D, U, DU, N description of shaft outlet position, second *=C, R description of motor rotating direction C-CW , R-CCW. Example: MED178AN12-HBDR, **/DR= Shaft outlet- D type, motor rotating direction viewed from rotor CCW-R type Sinwan reserves the right to change data and improve electrical & mechanical design without notice, data tolerance +-10%

Motor Type: Microprocessor programmable CPU controlled brushless DC, locked rotor & polarity protected   IP Protection: IP55 optional request   Frame: Aluminum diecasting, mounting holes dia.3.2mm self tapping or tapped M4   Bearing: Two high precision permanently lubricated ball bearings   Shaft: Stainless steel SUS420J2, dia.6mm, 30mm out. Customer's design available   Weight: 760Gm (1.7Lb)   Dielectric Strength: Over 1 sec. at 500VAC, maximum leakage 500 micro Amp.   Insulation Resistance: Over 10 mega Ohm at DC 500V between leads and frame   Speed Control: PWM, S/C NTC thermister, S/V (0~10V) speed control on request   Operating Temp: Acceptable -25°C~+65°C. Storage -30°C~+90°C (65%RH)   Life Expectancy: 60K hours at 45°C, 30K hours at 60°C. MTBF life 100K hours at 55°C