‧AC‧ MEA109 Sinwan AC Motor, Dia.59 x L.41 Max. Loading 21W, IP55

Rated Voltage Freq Rated Loading Input Ref. Loading Speed No Loading Free Running Locked Rotor Seized Motor No Loading Staring UL Input Current Speed Input Current Voltage   Model No VAC Hz Watt RPM Watt Amp RPM Watt Amp VAC   MEA109AN11-1B** 115 50/60 21/20 2750/3100 18/15 0.23/0.20 2800/3500 27/25 0.28/0.25 37/44 £ MEA109AN11-2B** 115 50/60 14/13 2400/2500 12/10 0.16/0.13 2795/3495 22/18 0.22/0.19 39/47 £ MEA109AN11-3B** 115 50/60 12/9 1700/1800 10/7 0.13/0.10 2790/3490 17/15 0.18/0.15 42/50 £ MEA109AN22-1B** 230 50/60 21/20 2750/3100 18/15 0.12/0.10 2800/3500 27/25 0.14/0.13 62/66 £ MEA109AN22-2B** 230 50/60 14/13 2400/2500 12/10 0.08/0.06 2795/3495 22/18 0.11/0.09 64/68 £ MEA109AN22-3B** 230 50/60 12/9 1700/1800 10/7 0.06/0.05 2790/2490 17/15 0.09/0.07 69/72 £ MEA109AN38-1B** 380 50/60 21/20 2750/3100 18/15 0.07/0.06 2800/3500 27/25 0.09/0.08 97/105 £ MEA109AN38-2B** 380 50/60 14/13 2400/2500 12/10 0.06/0.05 2795/3495 22/18 0.08/0.07 103/112 £ MEA109AN38-3B** 380 50/60 12/9 1700/1800 10/7 0.05/0.04 2790/3490 17/15 0.07/0.06 110/116 £ MEA109AN44-1B** 440 50/60 21/20 2750/3100 18/15 0.05/0.05 2800/3500 27/25 0.06/0.06 128/136 £ MEA109AN44-2B** 440 50/60 14/13 2400/2500 12/10 0.04/0.04 2795/3495 22/18 0.05/0.05 156/168 £ MEA109AN44-3B** 440 50/60 12/9 1700/1800 10/7 0.03/0.03 2790/3490 17/15 0.05/0.04 165/182 £ **= DC / DR / UC / UR / DUC / DUR / NC / NR, for full model No. click “Nomenclature”. First *=D, U, DU, N description of shaft outlet position, second *=C, R description of motor rotating direction C-CW , R-CCW. Example: MEA109AN11-1BDR, **/DR= Shaft outlet- D type, motor rotating direction viewed from rotor CCW-R type 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380, 440, 480V... 50/60Hz, & any voltages available. Dual speed High/Medium 1/2, Medium/Low 2/3 available on request. Sinwan reserves the right to change data and improve electrical & mechanical design without notice, data tolerance +-10%

Motor Type: External rotor, shaded pole, single phase, 2 pole, impedance protected   IP Protection:   Frame: Aluminum diecasting bracket & frame, 7 mounting holes dia.2.3mm or tapped M3   Bearing: Two high precision permanently lubricated ball bearings   Shaft: Stainless steel SUS420J2,dia.5, L. 30mm, optional configurations, CW or CCW on request   Weight: 230Gm (0.5Lb)   Dielectric Strength: Over 1 min. At 1,5000VAC, 0.5mA, 50/60 Hz   Insulation Resistance: Over 100 Mega Ohm at DC500V, between leads and frame   Signal Output:   Operating Temp: Acceptable -20°C~+65°C. Storage -30°C~+105°C (65%RH)   Life Expectancy: Rated loading continuous duty 65K hours at 45°C, 40K at 60°C. MTBF 90K hrs at 35°C